Riveted Rib into LH Tip - 6 blind rivets and 13 flush rivets. Re-installed to mark aft edge for trimming. Did both LH and RH aft edges - each needing about 1/4" trimmed off. Fortunately, with the RH Tip I noticed earlier the top and bottom skins would likely separate when I trimmed off that much (the LH was A-OK) due to a void. They didn't get original cloth and resin fully into aft end. So I added about 3/8" of cloth and epoxy inside at wedge end. Once trimmed off, a gap clearly shows this was critical ! I'll fill with epoxy w/ flox now, but it's very solid.
 |
| the gap...but it's solid behind. So will fill flush. |