A few locations on the interior needed some re-painting. Simply sanded with 400 grit, cleaned and sprayed a couple light coats. These blended perfectly...so very satisfied with overall results. Completed Elev. Bellcrank Assembly at Sect 36-06, Step 5. Finished Fwd, Mid, and Aft Elev Pushrods by blind riveting Rod Ends, then installed Rod End Bearings / Jam nuts to specified lengths per Steps 7-9 Sect 36-03 and Steps 7-8 Sect 36-04 (Aft Elevator was to 1/32" over 6 ft length).
