Nancy (again) helped move Canopy back to bench. Pleased alignment on Fuselage and on bench is exactly the same...so no twist between either location. Completed Steps 12-18, Sect 38-28 adding West Systems epoxy resin (105 resin & 206 slow hardener) w/ microballoons to fill triangular void between top of Canopy Skin and angled edge of Canopy. Lot's of mixing...adding black tint first, then slowly adding microballoons. Wearing mask seems important - those microballoons "float" in air like dust if disturbed. Van's 4 videos on these steps are really helpful.
 |
| not all smooth, but will be sanded to profile anyway. I mixed a bit "thicker" with microballoons than needed. |