Seat Backs ( 3 hrs )
Prepared to prime Canopy Fairing by taping along Aft edge, and ahead of feathered area along Fwd edge. Decided to mix another batch micro/epoxy to improve feathering in a couple areas (fingertips could detect slight transition between alum skin and Fairing). Delayed 1st coat of Primer. While curing I started Sect 39 - Seat Backs by deburring holes and edges. Nice to be building again vs sanding. Also cut seals to fit Hinge Covers per Steps 4-7 in Sect 38-36.
 |
| gathering most parts for Seat Backs |
 |
| added foam seal to Hinge Covers |
