Final sanded the primer coat w/ 400 grit to a smooth finish. Removed tape in front for feathering, then the big reveal - removed last layer of vinyl tape on aft edge of Canopy. Very satisfying to see clean edge along windshield. Finally. ( I didn't cover the front of the canopy, so plastic protection sheet got overspray...) Also torqued LH & RH Steps. When I stopped in local Napa store to buy more Napa 7220 primer, I found they had a 5/16" socket/U-joint combo for ~$8 (much lower than some I'd seen on-line). This worked a little better when using my torque wrench. I had to use a mirror to see the nut while applying torque seal indicator, so kinda messy.
