Ground two 8" x 3/8" Bolts creating drift pins for Wing to Spar assembly (Sect 41-03, Step 1). Rec'd Shims from Vans, so installed immediately to correct excessive toe-in. Now measures 0 deg for RH, and 0.15 deg for LH -- both within max 0.25 deg specified. Installed Wheels per 40-09 Step 1, following both Vans and Grove instructions. Installed Brake Caliper Assl'y per Step 2 at 40-09. Safety wired two Back Plate Bolts on each Caliper - my first time doing bolts. You-Tube has many example videos that really helped. Need Permatex #59214 high temp sealant for pipe elbow fittings (for brake lines)...so not added yet in photos.
 |
| Waiting for Shims....so created Drift Pins for later |
 |
| Shims arrived...Yay |
 |
| RH Shim installed, 0 deg measured |
 |
| LH Shim installed, 0.15 deg measured |
 |
| Wheel Nut & cotter pin installed |
 |
| Grove Brake Calipers |
 |
| Installed; prior safety wiring Back Plate nuts |
 |
| Tah Dah ! Now on all 3 Wheels |
 |
| Safety Wire for Back Plate Nuts |
