Cont'd details on LH & RH Common Fuse Harness, per Sect 55. Installed Power and Music Jacks in center tunnel between seats. Installed several more snap bushings . Connected Flap Position Sensor with wires routed to Flap Motor. Ready now to join connectors at Aft Bulkhead, and do Pilot Joystick harness (which requires cutting open panel adjacent to center tunnel - just as done on RH side). Also received new pics from Stein Air showing progress on Panel. Labels have been engraved into painted surface ( Black Onyx ) - looking good !
 |
| Power and Music Jacks |
 |
 |
| rearward behind Flap Support. Note: although appears routed through lower holes w/o bushings, actually passing via snap bushings hidden by flap arm. Also has 1/2" clearance. |
 |
| pios from Stein Air. Panel is now engraved |
 |
| close up toggle switch labels |
 |
| close up T/P/M holes and labels in revised location - integral to bottom of Panel, vs below in add on bracket. Provides needed knee clearance for my 6'4" frame |