Heat Shields for Bottom Cowl and Baffle Seals ( 4 hrs )
Completed Sect 45-26 Bottom Cowl Heat Shield Steps 1-8. RH side cylinders are ahead of LH side, hench heat shields are not symmetrical. For the Finish Kit, this leaves only Sect 41: Wing Attachment, and Sect 46A: Tri-Gear Leg & Wheels Fairings. So...back to Firewall Forward Kit to Sect 47: Cowl Baffles ( re-start at pp 23-30). About 1/2 done riveting on rubber baffle seals (pop rivets with large washers).
 |
| 1st section done. |
 |
| All 3 sections "squeeged". Edges sealed with epoxy resin. |
 |
seal sections are not labeled. So...need to check orientation
carefully...some are nearly identical but slightly different. |
