Removed Fairings after flox cured. Relieved they came off relatively easy, except one of four hung up due to excess flox rolling over edge. All 8 surfaces turned out OK, which is relief since essentially positioned blindly. Ground off excess with dremel. Started nutplates per Sect 46A-07 Steps 5-9.
 |
| RH with Aft Fairing installed. Can see white flox where Bracket interfaces with Fairing |
 |
| Example result epoxy/flox mix on Fwd Fairing. Smooth area is Bracket contact area. Green is Turtle wax used as mold release. |
 |
| First nutplate added between Aft and Fwd Fairing shells. Shows Aft contact area on left, and Fwd contact area on right. |
 |
| RH inner Bracket |
 |
| RH outer Bracket |
