Primed Standoffs. Marked centerline per 46A-09, Step 4. Since Fairings are not translucent (earlier versions were prior to Vans providing now with pinhole filler primer which is opaque), I explored using provided spherical magnets to locate holes in Fairing. Drilled #40 holes in Brackets per Step 1 at 46A-10, then glued sph magnets temporarily using drop of cyanoacrylate. Also made spacer block per Step 2, 46A-10. Experimented with lifting nosewheel to 0 to 1/16" off ground (results in fuselage at 2.8 deg vs level, so need to compensate -raising "tail", or ? )
 |
| spherical magnets temporarily glued to facilitate determining location of holes in Fairing (use sph magnets on outside) |