Completed installation of P-Lead and gnd wire to LH Mag. Connected Oil Temp sensor and bundled wires w/ P-Lead. Soldered Fuel Press and Oil Press sensors at LH firewall, leaving extra lengths (just in case require re-do, etc). Wrapped engine mount tube with silicone tape for protection, then cable tied "loops" of sensor wires to tube.
 |
| top view showing wire routing to LH Mag & Oil temp sensor |
 |
| Add caption |
 |
| first pressure sensor wiring soldered connections with 2 layers heat shrink tubing |
 |
| both press sensors connected. |
 |
| silicone tape over engine mount tube, then cable tied "loops" of wiring |
 |
| nested wiring and secured with cable ties |
