Wiring to Fuel Flow Transducer ( 2 hrs )
Connected "red cube" Fuel Flow Transducer (Electronics International FT-60) to wires from GEA24 J243. Stein Air's Chris confirmed they recommend using the OLC-1 connectors supplied with transducer. I staggered the 3 connectors to nest for a tighter package. Used layers of heat shrink tubing followed by wrapping with silicone tape, then cable tied into bundle with CHT sensor wiring.
 |
Instructions for OLC-1 connectors...
Testing alignment with sample of wire |
 |
| wrapped with silicone tape, prior to bundling with CHT wires |
 |
| cable tied to bundle with CHT wiring |
