Update 5/29/19: needed to switch Fuel Pump On to Discrete #2, so Discrete #3 could be aligned with Canopy Warning. #3 is locked in by Vans program for Canopy Warning uploaded into G3X. So I switched Purple/Grn wire and Purple/Blu wire in connector J244 at GEA24. This aligns Purple/Grn to Pin 41 and Discrete #2. And Pin 42 = Discrete #3 (now #2) for Purple/Blu wire.
Per Sect 61-03 and Van's W00125 schematic for canopy wiring, crimped on 6 Molex pins into ES00012 connector. Snapped into F01477-L. Stein provided heat shrink labels.
reference:
Pin 12 Discrete 2 [now Discrete 3 ] (Purp/Blu)
Pin 11 Gnd (Blk) from forest of tabs on firewall
Pin 10 Defrost Pwr (Red)
Pin 9 Cabin Lights Pwr (Red)
Pin 8 PWM Light 2 (Wht/Blk)
Pin 7 PWM Light 1 (Wht/Blk)
...and PWM Light 3, DC Light 1, 2 & 3 unused...
 |
| Partially done inserting pins |
 |
| Connector in place, pending wire protection. PWM 3, DC Light 1, 2 & 3 unused, (ends covered with heat shrink labels) |
 |
| extra schematic Stein Air's Josh Swensen provided....shows how 2 LED strips should be connected |