Installed Halon fire extinguisher (A344T, 1.25lb 1211 Class B C) in baggage area - where pilot can easily reach on wall behind passenger. Installed LH and RH "Stick to Torque Tube Pushrods" per Sect 41-07, Step 1. Installed Exhaust per Sect 48-02, Step 4 & 6,7. Used Permatex #77124, Nickel Anti-Seize Lubricant on slip joints. Attached Engine Dryer to insure engine interior remains low humidity since opened to install exhaust. With both 'spark plug' desiccants and circulating dry air, believe I have protection against corrosion.
 |
| Halon fire extinguisher in baggage area. Amerex A344T, 1.25lb 1211 Class B C |
 |
| LH forward Exhaust added (taped over holes for EGT sensor). Cover still on rear exhaust port. |
 |
| From under LH side with rear exhaust added. Note: Heat shields in several locations not yet added. |
 |
| From under tailpipe |
 |
| Exhaust joining Y for Tailpipe. |