Steevo's RV14a Build Log

Tuesday, November 13, 2018

Avionics

›
Shunt and ANL Fuse Limiter ( 4 hrs ) Mocked up installation design of ANL Fuse Limiter Block w/ 60 amp Fuse and Shunt for mounting inside...
Saturday, November 10, 2018

Avionics

›
Mags wired to Ignition Switch & P909 Alternator Power Wire ( 3 hrs) Attached Right, Left and Gnd wires for Mag and PMAG to Ignition Sw...
Friday, November 9, 2018

Avionics

›
J243 Connector and Mag Wiring ( 4 hrs ) Connected J243 to Garmin GEA24 on RH sub-panel after splitting "Tach Sensor Mag" (connec...
Thursday, November 8, 2018

Avionics

›
Ground Plate and GEA24 J242 ( 3 hrs ) Torqued 5/16" bolts (one brass, other SS) attaching ground plate/"forest of tabs" to ...
Saturday, November 3, 2018

Avionics

›
Forest of Tabs ( 2 hrs) Crimped 13 blue (14-16 ga) Faston terminals onto 25 black ground wires:  (2) 18ga wires at each terminal, (20) 22 ...
Friday, November 2, 2018

Avionics

›
Forest of Tabs ground plate on Firewall ( 1 hr ) Started to mount "forest of tabs" grounding plate to inside of LH Firewall area...
Tuesday, October 30, 2018

Avionics

›
Circuit Breaker re-visited and Canopy Release ( 3 hrs ) Last week discovered Cabin Lights CB didn't have a wire connected.  Stein Air ...
‹
›
Home
View web version

About Me

My photo
Steevo
Wickenburg, Arizona, United States
I'm building an RV-14A kit airplane purchased from Van's Aircraft. This website documents construction to show I've built in accordance with FAA's 51% rule. When finished it will be inspected by the FAA or designated representatives, and a special airworthiness certificate will be issued under the Experimental category.
View my complete profile
Powered by Blogger.