Steevo's RV14a Build Log

RG400 Coax antenna cables ( 3 hrs ) Routed RG400 coax from RH side Fuse at Comm whip antenna through to center tunnel.  Very difficult to...

SB 18-09-17  ( 2 hrs ) My wife Nancy did great job w/ rivet gun under fuselage while I bucked from inside.  I laid down a layer of empty 2...

SB 18-09-17  ( 2 hrs ) Started Service Bulletin SB 18-09-17 "Cracking of F01478 Aft Fuselage - Forward Bottom Skins".  Examples ...

OAT wiring in Wing, GA 35 GPS antenna ( 3 hrs ) Fabricated 3 alum "brackets" to hold SB437-4's to guide/support OAT wire in ...

Static, Pitot & AOA connected, Comm Antenna installed ( 4 hrs ) Connected Static (red), Pitot (white), & AOA (blue) lines to G3X a...

GAP 26 wiring ( 1 hr ) Tightened and torqued gnd bolt.  Bundled wires along with alum tubing.  Sent email with pics to G3Xexpert@garmin.co...

Gap 26 heated Pitot  installed ( 3 hrs ) Trimmed 3/16" OD alum tubes to 8 1/4" on GAP 26 heated Pitot (Garmin instructions note ...