Finish Kit

Countersinking Holes in Canopy ( 4 hrs )

Machine C'sunk all the holes around Canopy.  Took lot of time - proceeding carefully - and checking each hole with "gage" to be sure correct depth so heads would be flush.   Decided to arrange Canopy Frame on Fuselage (instead of bench) to insure alignment.   But next steps required setting up 2x4's on bench for access to rivet on Side Skins.  So with Nancy's help again, removed Canopy, then Frame, then  set up on bench per instructions.

1st time Canopy on after paint

 

checking screw head will be flush

set up on bench.   rivet Side Skins on next...