Finish Kit

Seat Backs and Miscellanea ( 4 hrs )

Completed Seat Backs with remaining rivets along LH and RH sides, then Sect 39-06 & -07 for Hinge Pins.   Since I'll probably leave off Seat Back Braces due to using only rearmost position (they're not engaged), I didn't add the safety wire retentions for the Hinge Pins.  But they fit perfectly and work really well.   Also made the bottom Hinge Pins ~ 1/4" longer to allow long taper for easier insertion.  Overall, the Seat Backs fit and look great.  I started Sect 42, called "Miscellanea" - which are the removable interior covers.  Deburred Seat Ramp Cover, and LH & RH Control Column Covers.  Attached the few nutplates (buffed, cleaned and primed just at nutplates for now - so I could install.  Planning major prime and painting session later )

Seat backs fit perfectly between black UHMW
blocks on crossbar

in rearmost position, braces are not used...

alternate brace positions if seat moved to
middle and forward positions

tip forward to access baggage area