Seat Backs and Miscellanea ( 4 hrs )
Completed Seat Backs with remaining rivets along LH and RH sides, then Sect 39-06 & -07 for Hinge Pins. Since I'll probably leave off Seat Back Braces due to using only rearmost position (they're not engaged), I didn't add the safety wire retentions for the Hinge Pins. But they fit perfectly and work really well. Also made the bottom Hinge Pins ~ 1/4" longer to allow long taper for easier insertion. Overall, the Seat Backs fit and look great. I started Sect 42, called "Miscellanea" - which are the removable interior covers. Deburred Seat Ramp Cover, and LH & RH Control Column Covers. Attached the few nutplates (buffed, cleaned and primed just at nutplates for now - so I could install. Planning major prime and painting session later )
 |
Seat backs fit perfectly between black UHMW
blocks on crossbar |
 |
| in rearmost position, braces are not used... |
 |
alternate brace positions if seat moved to
middle and forward positions |
 |
| tip forward to access baggage area |
