Firewall Forward Kit

Completed Oil Cooler Install, Sniffle Tubes,  Cooling Blast Tubes, Routed Spark Plug Wires ( 4 hrs )

Completed torquing Oil Cooler hose fittings, since new 7/8" crowfoot arrived.  Needed variety extensions & U-joint due to tight, awkward locations between engine and firewall.  Installed 4" SCAT tube for Oil Cooler per 49-15, Steps 2-5.  Sweet!   Final torqued fittings on MAP hose and sensor with final routing adjacent to 4" SCAT.  Cut Cooling Blast Tubes to 9" lengths, installed at Baffles per Steps 2 & 3, Sect 47-24.  Wait to secure after other routings done.  Completed preliminary routing Slick Magneto plug wires to T2 and T4 (top cyl's 2 & 4), and PMAG wires to T1 & T3 (top cyl's 1 & 3) through Baffle Back Plates per 47-24.  Built Sniffle Tube & Hose Assly per Steps 1-4, Sect 49-17.  Interesting technique to first flare alum tube end, then grind down to provide bead to retain hoses.

challenging to access AN8 fittings on Oil Cooler hose 

4' SCAT tube installed. 
Torqued fittings on MAP line with T to PMAG.

PMag top plug wires routed through Baffle plate. 
Cooling Blast tubes (black) installed (not retained yet)

Slick Magneto plug wires to Cyl #2 & #4 routed.

created Sniffle tube...install after exhaust added...