Steevo's RV14a Build Log
Thursday, April 7, 2016
Empennage
›
Elevators ( 2 hrs ) Sect 9-09, Setp 2 Attached (cleco'd) LH and RH Elevator Horns. #30 (ie 1/8" holes) drilled at twelve times ...
Empennage
›
Elevator ( 2.5 hrs ) April 6 , 2016 Cont'd Sect 9-08, Steps 2 & 3: Cleco'd RH and LH Tip Assly's to Bottom Skins and...
Tuesday, April 5, 2016
Empennage
›
Elevator (0.5 hrs) Cont'd Sect 9-07: Completed Steps 4-6 for Trim Tab Hinges - Drilled #40 holes, and trimmed ends flush. Re-assemb...
Monday, April 4, 2016
Empennage
›
Elevator (4 hrs) Continued Sect 9-04 w/ Step 4 & 5. Drilled 2 holes in end of Trim Tab Hinge while designating one Aft and other Fwd ...
Sunday, April 3, 2016
Empennage
›
Elevator (1.5 hrs) Sect 9-03, Step 3. After removing vinyl at Close Out Tabs on Left Top & Left Bottom Skins, marked bend lines. Th...
Saturday, April 2, 2016
Empennage
›
Elevator (4.5 hrs) Sect 9-2 Step 4: Used hand seamer to adjust flanges to 90 deg on both E-904 Inboard Ribs and both E-903 Outboard Ribs...
Friday, April 1, 2016
Empennage
›
Elevator (1.5 hrs) Finished Page 9-2 Step 1 by deburring all edges...a LOT of edges for all 12 Ribs. Time consuming, but good to get these...
‹
›
Home
View web version
