Steevo's RV14a Build Log

Pitot Heater wire install & ADS-B Antenna ( 3 hrs ) Crimped open barrel male pin (ref Sect 5-21 for instructions) to red 14ga wire for...

Pitot and AOA lines ( 2 hrs ) Routed blue 1/4" OD nylon air line  for  AOA  through fuselage from wing root to IP.  Routed "...

Joystick Boots ( 2 hrs ) Per Sect 42-07, positioned joystick boot material (used mini-clamps & double sided tape), then riveted w/ AAC...

Snap Bushings for OAT cable, Pitot, & AOA lines ( 3 hrs ) Drilled 8 places with Uni-bit for SB375-4 bushings in LH seat ribs - will ro...

OAT wire routed, etc ( 3 hrs ) Routed OAT (outside air temp probe) from backside of G3X Touch display (GDU460) to center tunnel.  Required...

Static Air Line, etc  ( 3 hrs ) Added more red RTV (hi temp) at few places on engine baffles which showed up with "light test". ...

Main Amps fuse link ( 2 hrs ) Re-worked "Main Amps" connection to Shunt on LH firewall (inside - so hard to reach, of course !)....