Steevo's RV14a Build Log: 10/26/17

I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.

But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.

Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Thursday, October 26, 2017

Finish Kit

Painting Canopy Frame ( 4 hrs )

With decent weather today ( sunny, 65 deg F) vs forecast for 40's for next several days, I worked quickly to be able to paint outdoors. Otherwise, I'd need to set up my temporary paint booth, and the
Frame would be a tight fit. I prepped the Frame by scuffing followed by cleaning with acetone, then sprayed the acid etching Napa 7720 Primer as usual. While drying, I dimpled the Canopy attach holes in C01419 L & R Side Skins. I primed these, and the shims for the Canopy Rails. Next, sprayed Rustoleum Professional "aluminum" (same as cockpit interior). Then masked off so I could spray Glare Shield with Rustoleum Satin Black. Determined too shiny, so I made final pass with Flat Black. Success ! Ready to re-assembly Canopy onto Frame.