Steevo's RV14a Build Log: 12/02/17

I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.

But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.

Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Saturday, December 2, 2017

Finish Kit

Interior Covers ( 4 hrs )

Deburred edges and holes on remaining interior covers per Sect 42. Then Nancy was big help buffing all those panels using scotchbrite and cleaning with acetone. Enabled me to take advantage of another 60 deg sunny day to use the outdoor "spray booth" for priming with Napa 7220. Also dimpled Flap Motor Covers, switching from round head to flush rivets for smoother appearance.

...much easier than setting up my temporary booth

a lot of covers primed

prefer to dimple these for flush rivets vs round
head. Quickly primed along rivet line
(complete priming on assembly later)