I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.
But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.
Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Saturday, August 11, 2018

Finish Kit

Intersection Fairings ( 3 hrs )

Completed grinding & sanding excess resin inside leading edges of all 4 Fairings, and high spots under contact edges.  Aligned Upper and Lower Intersection Fairings with Leg Fairings installed per Sect 46A-22.  Marked locations on Intersection Fairings on Leg Fairings.  Per Step 5, 46A-22: wrapped specific # layers of masking tape to act as spacers between Intersection and Leg Fairings.
1st time Leg Fairing installed.
It self aligns, fits well.
Pleased w/ fit of Lower Intersection Fairing to Wheel Fairing.
Lots of sanding/filing/grinding to achieve...!


Pleased with fit of Upper Fairing to Fuselage.

another pic of good fit onto Wheel Fairing
Upper, Leg, Lower, & Wheel Fairings


wrapped layers of  masking tape at 4 locations
Posted by at No comments:
Labels:
Subscribe to: Posts (Atom)