I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.
But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.
Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Tuesday, March 19, 2019

Engine and Firewall Forward Kit

Oil Cooler TCW Air Valve install  ( 3 hrs )

Painted semi-gloss black, mounted bracket to bottom IP for Oil Cooler Air Valve (from TCW).  Reference prior build log Feb 2.  Positioned valve on Oil Cooler to align with push-pull cable.   After routing cable through Firewall, I cut cable to length.  (Since not part of Vans instructions, it takes longer examining options and measuring 3 times).   Mounted air valve with (2) AN526 632R6 screws & MS1042 06 metal locknuts.   Sealed with hi-temp RTV.  Temporary attached cable---will finish tomorrow.
Cable control and bracket installed.   
Trying one of several labels Stein Air provided.
Ready to complete cable attachment.  But
first need to secure cable to engine tube with
Adel cushion clamps (where blue tape is now)
Posted by at
Labels: ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)