Steevo's RV14a Build Log: 06/19/17

I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.

But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.

Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Monday, June 19, 2017

Fuselage

Elevator Pushrods ( 3 hrs )

A few locations on the interior needed some re-painting. Simply sanded with 400 grit, cleaned and sprayed a couple light coats. These blended perfectly...so very satisfied with overall results. Completed Elev. Bellcrank Assembly at Sect 36-06, Step 5. Finished Fwd, Mid, and Aft Elev Pushrods by blind riveting Rod Ends, then installed Rod End Bearings / Jam nuts to specified lengths per Steps 7-9 Sect 36-03 and Steps 7-8 Sect 36-04 (Aft Elevator was to 1/32" over 6 ft length).

Marshall County Flyers 50th Annual Father's Day breakfast / fly-in was another big success (Sunday, June 18). Served over 1,500 people! My wife and I worked along with 50 other volunteers from 6am to 3:30. Lot's of work, but fun to see the enthusiasm from the community. Lots took advantage of airplane rides for $15.