Steevo's RV14a Build Log: 05/08/18

I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.

But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.

Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Tuesday, May 8, 2018

Avionics

LH Joystick harness ( 3 hrs )

Enlarged notches on 3 locations for routing LH Harness to Pilot's joystick -- required due to connector that won't pass otherwise. Managed with great effort to manipulate connector through, then add 3 snap bushings. Finally, secured ground wire -- itself challenging due to tight access. Whew ! glad that's done... Note: continuing to work with Abby at Flightline Interiors to determine materials & colors for seats, joystick boots, armrests, and sidewall covering. Most recent sketches included...Jones6 and Jones7. Only difference is Jones6 has vinyl armrest matching seat, other has armrest that matches upper sidewall color and material (Alcantara #2957).

close up of 2 holes/notches now filled with snap bushes - these
are very difficult to reach and manipulate connector through

Jones6 concept

Jones7 concept