I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.
But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.
Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Tuesday, October 23, 2018

Firewall Forward and Finish Kit

Control Cables and Interior ( 3 hrs )

Installed two Adel cushion clamps to left and right sides of Circuit Breaker Panel.  Added nylon ties for extra support of cables (see pic).  Carefully tightened cable nuts at IP.    Yay !...received large box containing interior from Flightline Interiors (Abby) so unpacking was like Christmas morning.  Lots of unpacking and trial fitting...then Nancy gave a thumbs up !   We like the color and materials really well:  "Condor" vinyl with "Marble" fabric inserts in seats, Marble on upper panels and Condor vinyl on lower panels and armrests.   Black joystick boots with gray stitching.  Charcoal baggage area  and floormats.  [note:  flash pics / fluorescent lighting affects colors ]  Still pending delivery of black seat belt harnesses.  Positioned loosely since not ready for final install.   Sweet !
underneath control cables
Baggage floor mat...loosely positioned

1st mock up installation.   Joysticks and many alum panels not installed, including seat backs







Posted by at No comments:
Labels: ,
Subscribe to: Posts (Atom)