I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.
But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.
Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Wednesday, August 15, 2018

Finish Kit

Intersection Fairings ( 4 hrs )

Removed all 4 Intersection Fairings ( yep, they didn't stick permanently! ). Ground off excess flox per Steps 6 at 46A-24.  Completed Steps 1-4 at 46A-25 building lugs with resin/flox on Upper Fairing encapsulating MS21042-06 Nuts that will serve to keep aft ends tight.
green is the turtle wax transferred to resin/flox. 
Perfect contact with Wheel Fairing

after grinding excess flox.

geesh...more fiberglass dust !

ready to embed nut
thick resin/flox starting to cure
hoping sufficient wax on threads so I can remove screw !


Posted by at No comments:
Labels:
Subscribe to: Posts (Atom)