Steevo's RV14a Build Log: Firewall Forward Kit

I've started my adventure to build a Van's Aircraft RV14a. For several years, I've been planning to build an Experimental (homebuilt) airplane - once retired.

But first, I needed to get my Pilot's License. (Kinda key !) So... first things first: I retired March 2014 from Caterpillar - and started flying lessons in the Summer of 2014. Soloed a day after Christmas, and got my Private July 2015. Shop set up, tools acquisition, and practise kits during Fall launched me into my build starting Dec 31, 2015 !

I've chosen to build the RV14a since it's about 10% larger than Van's prior models - so it fits my 6'4" frame well. Van's is well known for great value & outstanding flying qualities. It's been a no brainer decision for me. A tour of their facilities and demo flight in Oct 2013 clinched the deal. My wife - also a pilot - exclaimed after her demo flight "retire NOW so you can build one of these". The RV14a fits my mission of a good compromise between cross country & aerobatics. Plus...I fit, too.

So far, one month into building, it's been rewarding. Very challenging, but certainly a learning experience. The builder community is terrific - as is Van's tech support. I'm finished with the Vert Stab and Rudder (Jan 2016). So... with a 5 month delivery lead time, I've ordered the Quick Build Wings and Fuselage.

I hope this blog assists other new builders, just like several others have been valuable to me. Plus it will serve to document my build step by step. Please drop me a line via the "contact me" form on lower RH margin.

Update: April 2020 relocated to Wickenburg, Az to escape Illinois winters.

Saturday, March 17, 2018

Firewall Forward Kit

Wiring to Starter & misc ( 3 hrs )

Routed WH-P16 Starter Wire from starter relay at firewall to Sky-Tec starter (model 149-12XLT, pre-installed by Lycoming) per Sect 43-11, Steps 1-7. The "Detail A" to install mounting clamp and VA-163 to engine case was challenging due to tight confines. Added adel clamps several locations per 43-10, but waiting on most until actual wiring is ready to be routed (so don't need to do over !). Beginning to install Alternator per 43-12. Plane Power P/N AL12-E160N, S/N H-R061143 (Vans ES Alternator Deluxe, part of kit. Features internal regulator "crowbar" with over-voltage protection.